Everything below concerns Karl Fischer titration. We keep the language plain, cite what the science says, and separate well-supported claims from open questions.
Last reviewed on 2026-08-01. Where a claim depends on a specific study, the study is described rather than over-claimed.
Quality control for creatine monohydrate begins with identity confirmation and assay determination. Laboratories commonly use high-performance liquid chromatography with ultraviolet detection, often after derivatization or using a suitable column, to quantify creatine. Karl Fischer titration measures water content, which helps verify the monohydrate stoichiometry. Additional tests screen for heavy metals, residual solvents, and microbial contamination depending on the intended use. These tests establish composition and purity rather than biological effect.
Stability studies examine how creatine monohydrate changes under controlled temperature and humidity. The solid is generally stable when kept dry, but moisture can promote hydrolysis to creatinine, especially in solution or at elevated temperatures. Color, odor, and assay values are monitored over time to detect degradation. Because degradation pathways depend on storage conditions, shelf-life claims should specify the tested packaging, temperature, and humidity. Open questions remain about the long-term behavior of different crystal habits and particle sizes.
In aqueous solution, creatine monohydrate undergoes a slow conversion to creatinine, a cyclized degradation product. This reaction is pH- and temperature-dependent, and it proceeds faster in warm or alkaline conditions. Because the conversion is gradual, analytical measurements of creatine in solution must account for time and storage history. The equilibrium favors creatinine more strongly at higher temperatures, which is relevant to sample handling in laboratories and to beverage formulations. Refrigeration slows but does not entirely stop this process.
Quality assessment of creatine monohydrate typically uses high-performance liquid chromatography to separate creatine from creatinine and other impurities. Other methods include nuclear magnetic resonance spectroscopy, titration, and infrared spectroscopy for identity confirmation. Purity is often reported as a percentage of the labeled compound on a dry basis, while moisture content is measured separately. Because different analytical methods have different selectivity, comparing purity values across sources requires attention to the method and sample preparation.
| Property | Value | Notes |
|---|---|---|
| Common synonyms | Creatine hydrate; N-carbamimidoyl-N-methylglycine monohydrate | Synonyms vary by naming convention |
| Typical assay method | HPLC-UV | Often paired with a reference standard |
| Water content method | Karl Fischer titration | Confirms monohydrate stoichiometry |
| Degradation product | Creatinine | Forms more readily in solution and with heat |
| Typical storage temperature | 15–25 °C | Keep dry and away from direct sunlight |
Commercial creatine monohydrate is produced mainly by chemical synthesis rather than extraction from animal tissue. Suppliers provide a certificate of analysis listing assay, water content, and impurity limits, and some products undergo third-party testing. Verification of identity can use infrared or Raman spectroscopy alongside chromatographic methods. Storage recommendations generally call for a cool, dry place and a tightly closed container to limit moisture uptake. Open questions include how packaging, flavoring agents, and long-term storage affect the stability of finished products.
Dry creatine monohydrate is generally stable when kept sealed and protected from heat and moisture. In solution, however, creatine undergoes a slow cyclization to creatinine, a related compound with no role in phosphocreatine storage. The rate of this conversion increases with temperature and is influenced by pH. Because creatinine is a common impurity in liquid or poorly stored products, analytical testing often measures both compounds. The crystalline monohydrate is less prone to degradation than aqueous preparations, though caking can occur if moisture enters the container.
Laboratory analysis of creatine monohydrate typically uses high-performance liquid chromatography to separate creatine from creatinine and other impurities. Detection may be ultraviolet, refractive index, or mass spectrometric, depending on the laboratory's equipment and the required sensitivity. Nuclear magnetic resonance spectroscopy can quantify the main component and identify related substances. Water content is measured by Karl Fischer titration, which is important because the monohydrate has a defined theoretical hydration level. Heavy metals, residual solvents, and microbial limits are also checked in quality control programs.
Analytical laboratories commonly identify creatine monohydrate by high-performance liquid chromatography with ultraviolet detection, often after dissolving the sample in water or dilute acid. Ion-exchange or reversed-phase columns separate creatine from creatinine and related guanidino compounds. Nitrogen content can be checked by Kjeldahl or combustion methods, while moisture is measured by Karl Fischer titration or loss on drying. These techniques give complementary views: chromatographic purity addresses related substances, whereas moisture and elemental data confirm hydrate stoichiometry. No single test defines quality by itself; a combination is used in specifications.
Storage recommendations generally emphasize a cool, dry place away from direct sunlight and strong oxidizers. Sealed containers limit humidity exchange, which helps prevent clumping and gradual conversion to creatinine. Long-term stability studies usually monitor appearance, moisture, and purity at intervals under defined temperature and humidity conditions. Accelerated tests at elevated temperature can reveal degradation pathways, but they do not perfectly predict room-temperature shelf life. Questions remain about how much creatinine formation is acceptable in different product categories and how packaging choices affect that rate over time.
In 2017, PTC acquired Emflaza (deflazacort) from Marathon Pharmaceuticals. PTC also owns Translarna, (Ataluren) marketed for nonsense mutation Duchenne muscular dystrophy. Together, the two products generated revenues of 174 million dollars and 260 million dollars in 2017 and 2018 respectively. PTC has the commercialization rights for WAYLIVRA (volanesorsen) in Latin America. In 2018, PTC acquired Agilis Biotherapeutics and a gene therapy candidate, GT-AADC, with its compelling clinical data in treating aromatic L-amino acid decarboxylase (AADC) deficiency. AADC deficiency is a rare CNS disorder arising from reductions in the enzyme AADC that result from mutations in the dopa decarboxylase (DDC) gene. As of 2024, the AAV based treatment for AADC deficiency has been approved by the FDA and commercialized in the United States as Kebilidi. It is the first FDA-approved gene therapy treatment for AADC deficiency. This same product was granted EMA approval for use in the European Union under the name Upstaza.
RNA sequencing (RNA-seq) RNA-seq is a high-throughput RNA sequencing technology that allows scientists to profile the entire RNA (transcriptome). Therefore, novel transcripts and gene expression level can be identified based on cDNA libraries. This method can be used for cancer diagnosis and treatment evaluation. Reverse transcription polymerase chain reaction (RT-PCR) RT-PCR is a widely used mRNA expression detection method. It enables reverse transcription of mRNA to cDNA for further identification and qualification. In early 1992, RT-PCR was applied in PSA gene expression in peripheral blood for early prostate cancer diagnosis. Digital PCR (dPCR) dPCR is a relatively accurate quantification method of measuring the initial concentration of mRNA targets. It can be applied to analyze genetic and epigenetic changes. In-situ hybridization (ISH) ISH is a tissue dependent visualization method of identifying mRNA targeted in the samples. The "tissue" can be blood sample. In chronic myeloid leukemia, ISH has been applied on peripheral-blood specimens.
ASBMB Award for Exemplary Contributions to Education ASBMB Leadership Awards ASBMB–Merck Award ASBMB Young Investigator Award Avanti Award in Lipids Bert and Natalie Vallee Award in Biomedical Science DeLano Award for Computational Biosciences Earl and Thressa Stadtman Distinguished Scientist Award Earl and Thressa Stadtman Young Scholar Award Herbert Tabor Research Award Mildred Cohn Award in Biological Chemistry - The Mildred Cohn Award in Biological Chemistry was established in 2013 to honor the scientific achievements of Mildred Cohn. Cohn was the first female president of the society, in 1978. The award of $5,000 is presented annually to a scientist who has made substantial advances in understanding biological chemistry using innovative physical approaches. The recipient is expected to deliver the Mildred Cohn Award lecture at the annual meeting. Ruth Kirschstein Diversity in Science Award The Alice and C. C. Wang Award in Molecular Parasitology Walter A. Shaw Young Investigator Award in Lipid Research William C. Rose Award
The 43S preinitiation complex (43S PIC) is a ribonucleoprotein complex that exists during an early step of eukaryotic translation initiation. The 43S PIC contains the small ribosomal subunit (40S) bound by the initiation factors eIF1, eIF1A, eIF3, and the eIF2-Met-tRNAiMet-GTP ternary complex (eIF2-TC). The 43S is an important intermediate complex during cap-dependent initiation in translation. In the canonical model of translation initiation, the 43S PIC is pre-formed as a stable complex and recruited to the 5' cap of eukaryotic messenger RNAs (mRNAs) by the eIF4F complex. The 43S PIC then "scans" in the 5' --> 3' direction along the mRNA in an ATP-dependent fashion (via eIF4A and/or other RNA helicases such as Ded1/DDX3 and DHX29) to locate the start codon. Start codon recognition occurs through base-pairing between the Met-tRNAiMet and AUG in the ribosomal P-site and a number of associated changes, and is followed by joining of the large 60S ribosomal subunit to form the 80S ribosome.
Sources: en.wikipedia.org
Recent advances have enabled simultaneous profiling of chromatin accessibility alongside other molecular modalities in the same cells or tissue sections. Spatial ATAC–RNA-seq and spatial CUT&Tag–RNA-seq allow co-profiling of genome-wide chromatin accessibility or histone modifications in conjunction with whole transcriptome on the same tissue section at near-single-cell resolution. ISSAAC-seq (In Situ Sequencing of chromatin Accessibility And Cellular transcriptomes) represents a multimodal update to ATAC-seq, providing a powerful method for investigating gene expression and chromatin accessibility within the same cell at high sensitivity and lower cost than commercially available kits. These multimodal approaches have led to the development of computational tools like SCRIPro, which combines transcription factor-target importance from epigenomic data with transcription factor-target expression from transcriptomic data to construct gene regulatory networks from single-cell and spatial multiomics data.
Archaeal transcription shares eukaryotic and bacterial ties. With eukaryotes, it shares similarities with its initiation factors that help transcription identify appropriate sequences such as TATA box homologs as well as factors that maintain transcription elongation. However, additional transcription factors similar to those found in bacteria are needed for the whole process to occur. In terms of transcription termination, the archaeal genome is unique in that it is sensitive to both intrinsic termination and factor-dependent termination. Bioinformatic analysis has shown that approximately half of the genes and operons in Archaea arrange themselves into signals or contain signals for intrinsic termination. Archaeal RNA polymerase is responsive to intrinsic signals both in vivo and in vitro such as the poly-U-rich regions. However, unlike bacterial intrinsic termination, no specific RNA structure or hairpin is needed. The surrounding environment and other genome factors can still influence the termination. Factor-dependent termination in archaea is also distinct from factor-dependent termination in bacteria. The terminational factor aCASP1 (also known as FttA) recognizes poly-U-rich regions, probably cooperating with the "intrinsic" mode to achieve more efficient termination.
As a prototypical transaminase, AST relies on PLP (vitamin B6) as a cofactor to transfer the amino group from aspartate or glutamate to the corresponding ketoacid. In the process, the cofactor shuttles between PLP and the pyridoxamine phosphate (PMP) form. The amino group transfer catalyzed by this enzyme is crucial in both amino acid degradation and biosynthesis. In amino acid degradation, following the conversion of α-ketoglutarate to glutamate, glutamate subsequently undergoes oxidative deamination to form ammonium ions, which are excreted as urea. In the reverse reaction, aspartate may be synthesized from oxaloacetate, which is a key intermediate in the citric acid cycle. Two isoenzymes are present in a wide variety of eukaryotes. In humans:
PTC Therapeutics, Inc. is a US pharmaceutical company focused on the development of orally administered small molecule drugs and gene therapy which regulate gene expression by targeting post-transcriptional control (PTC) mechanisms in orphan diseases. In September 2009, PTC entered into an agreement with Roche for the development of orally bioavailable small molecules for central nervous system diseases. PTC acquired the Bio-e platform in 2019.
Interpretation for secondary aldosterone deficiency Aldosterone response of several factors from a low base value. This factoring indicates secondary hypoaldosteronism (sodium low, potassium and renin enzyme will be low). Usually doubling to quadrupling from a low base aldosterone value is what is seen in secondary adrenal insufficiency. Decoupling of aldosterone in the ACTH stimulation test is possible (i.e. 2 ng/dl stimming to 20). A result of doubling or more of aldosterone may help in tandem with a cortisol stimulation that doubled or more confirm a diagnosis of secondary adrenal insufficiency. In rare cases, an aldosterone stimulation which did not double, but with the presence of low potassium, low renin and low ACTH indicates atrophy of aldosterone production from the prolonged lack of renin. Similar to the cortisol stimulation in ACTH deficiency, the test interpreter may lack knowledge of how to properly interpret for secondary hypoaldosteronism and think a result of aldosterone doubling or more from a low base value is good.
Sources: en.wikipedia.org
Karl Fischer titration is a standard method for measuring water content in solid and liquid samples. The result helps confirm the expected monohydrate stoichiometry. Loss-on-drying can also indicate moisture but may not distinguish water from other volatile substances.
Creatinine forms through irreversible cyclization and loss of water from creatine, and the rate increases with temperature, moisture, and pH changes. In dry solid form, the reaction is slow. In solution, degradation can become noticeable over time.
A specification typically lists assay range, water content, appearance, identification, and limits for heavy metals, residual solvents, and microbial counts. It may also include particle size distribution or bulk density for handling purposes. These parameters are distinct from any claimed performance effect.
Dry, sealed creatine monohydrate can remain stable for years, but storage conditions affect its shelf life. Moisture, heat, and repeated opening of containers can reduce quality over time.